|
The PS 4000 Series
Our 6”
and 8” Flat Wall Form (Dimensions)
sets the standard for speed, versatility, and quality construction. Available
in 24” and 12” heights, complete with 90° and 45° corners. 
The
Strength of Steel
Commercial concrete
form systems use steel ties because of steel’s inherent strength and
durability. The patented (pending) PolySteel tie in the PS 4000 is made
of galvanized steel wire, welded in at least 40 locations. This unique
design provides the strength, fire resistance, and dimensional stability that
is the hallmark of the PolySteel name.
Ease of Use
The improved
tongue-and-groove design simplifies installation on the job and minimizes the
clean-up associated with concrete spillage at the top of the wall during
multi-floor pours. The forms are reversible and the markings on each
side of the recessed attachment studs provide an easy guide for proper
alignment. The 1-1/2” width of each stud provides a strong,
secure, and generous surface area for mechanically securing any type of
interior or exterior finish.
Superior
Fire Rating
PolySteel was
the first and continues to be the only insulating concrete form to achieve a
four-hour fire rating without the addition of any wall covering. PolySteel’s
Steel Ties will not melt, burn, or emit toxic vapors like plastic ties can.
Versatility
The PS 4000 is
also offered in a half-size form (12” high) to minimize cutting in the
field and maximize design flexibility.
Optimum
Sizing
The 24”
height provides for eight sq. ft. of wall area to be installed with each
form, making installation up to 50% faster than most other ICFs. The PS
4000 is also available in 12” heights to minimize installation time and
maximize design flexibility.
Recessed
Attachment Studs
Clearly marked
for alignment, the recessed tie and stud simplify the application of
synthetic stuccos and other bonded finishes. A full 1-1/2” wide,
the attachment stud allows for the easy and secure attachment of any type of
wall finish.
|
